Alba (211)

I needed a round ball about 2.5 to 3 mm in diameter, but since I couldn't find any commercially available ones, I made o...

This is a reference image, a photo of the vending machine included in AMT's 1/25 Chevy Cameo Pickup assembled.

Thanks for watching...

This is what it looks like when placed next to the truck. There are no connecting parts or protrusions at the connection...

Thanks for watching.

This image saved with sRGB color setting.

Thanks for watching...

It's finished.

They are going out for italian job~ Thank you for watching. See you next time on the album of finished picture.

Thanks for watching.

Thanks for watching. ;)

Thanks for watching. :D

Thanks for watching.

Thanks for watching. ;)

It's done. I'm going to go play Zelda now~ ;) Tanks for watching.

Thanks for watching...

I also forgot to put the Porsche emblem on the nose. Thanks for watching. See you next time on the finished album. ;)

Thanks for watching.

Thanks for watching ;)

Thanks for watching.

Thanks for watching ;)

Finished.

And attach rear wing.

Finish

Thanks for watching.

Thanks for watching everyone~

Anyway, finally I attached the bonnet and side mirrors to complete all cars. Thanks for watching.

Thanks for watching. :)

Done.

Finish

cleaning with warm water

cutout air intake hole

Green arrow : Hasegawa sheet(red, flat black)

Apply to trunk hook

I should have detailed-up the rivets around the headlamps, but I forgot, so I worked on it belatedly. ;) All done. Thank...

It's done!! Although the level of completion is low considering it took 20 years to produce, the important thing is that...

Oh, This point was roughly done with a marker pen. ;)

Now it's really, really, really over. Thanks for watching~

block subsurface scattering

Sanding done.

Assemble chicken' legs.

Contents

Ready to assemble.

And it works! :) Thanks for watching. See you next in the 'finished' album.

Don't cut.

Finished.

Finished.

Applied Decal

I attached it with tape and left it in the food dryer for about a month.

It's finally over! Thanks for watching the long production period, and see you next time with the completed photos.

Finished.

Anyway, Anyway, it's over ;)

In the front, the area around the muzzle was painted with soot and weathering was finished.

Glossing done.

very excellent kit. I would like to recommend this kit to many people.

and Finaly, attach side mirror

All lions done. I'm out of HP because the assembly was too hard, transform/combine will have to wait until later.

Final Compounded

Ready for assemble.

Anyway, done.

Thank you for watching and for your encouragement.

Heavy trouble....

Thanks for watching... :)

Thanks for watching :)

removed large rivets were made by melting the runner and attached. https://youtu.be/AqlAsMK4qpg

decal

Finish. I skipped the washing, but I think it's pretty enough as it is. Thanks for watching.

Anyway I finished this. 1/24 bikes are really cute.

Finish.

Assemble ready.

Done.

Finish

Finished.

Finish.

All ready to assemble.

Done. In fact, the front grille emblem, keyhole, and bumper holes still need work, but I've gotten them done for my last...

Then glue the lamp cover.

Well. It's done.

Thanks for watching.

Finish

All decal works done. (Very nice decal quality)