Thunderbarrel, N469P - catch me if you can....
1April 23, 2017
2April 23, 2017
3April 24, 2017Additional panel with engine-control instruments.
4April 24, 2017
5April 24, 2017Removed gun fairings for reducing drag.
6May 1, 2017
7May 1, 2017
8May 1, 2017Little electric motor (Mabuchi) and R-1820 (Quickboost). On both sides a round piece of plastic for better alignment of the Mabuchi on Quickboost.
9May 1, 2017
10May 2, 2017R-1820 Cyclone ready for paint.
11May 2, 2017Who is faster: the plane or the mechanic?
12May 5, 2017
13May 7, 2017
14May 7, 2017
15May 7, 2017
16May 8, 2017Kit part replaced with 4 pieces round rod and rectangular plate. Fixed part of canopy separated from "rest".
17May 8, 2017
18May 8, 2017Wheels prepaired for connecting of power supply (2 x 1,5 V batteries)
19May 8, 2017Glued in place with CA and sanded wit 600 grit without damage.
20May 9, 20171st step: glued in place with few drops of CA. 2nd step: all gaps filled with Future to prevent of fogging.
21May 9, 20173rd step: after drying of Future all remained gaps filled with CA. 4th step: sanded flush with 600 grid sandpaper.
22May 9, 20175th step: sanding with micro mesh 3200,3600,4000 and 6000. 6th step: polishing with Tamiyas modeling wax.
23May 9, 2017
24May 16, 2017
25May 16, 2017
26May 16, 2017
27May 16, 2017
28May 16, 2017
29May 20, 2017
30May 20, 2017
31May 20, 2017
32May 20, 2017
33May 20, 2017
34May 20, 2017
35May 21, 2017
36May 21, 2017
37May 21, 2017
38May 22, 2017
39May 22, 2017
40May 26, 2017
41May 26, 2017
42May 26, 2017
43May 26, 2017
44May 26, 2017
45May 26, 2017
46May 26, 2017
47May 26, 2017
48May 26, 2017
49May 26, 2017
50May 26, 2017
51May 26, 2017
52May 26, 2017
53May 28, 2017Base in work.
54May 28, 2017Connection pins for voltage.
55May 28, 2017
56May 28, 20172x1,5V batteries.
57June 1, 2017
58June 1, 2017
59June 1, 2017
60June 1, 2017
61June 1, 2017
62June 1, 2017
63June 1, 2017
Commentaires
4 June 2026, 23:59 -
paper modeling database | gestionnaire d'inventaire


