'57 Chevy Convertible WIP Part-1
1June 22, 2020assembling before painting
2June 22, 2020Perforation
3June 22, 2020Wash off
4June 22, 2020fixing twisted attach point.
5June 22, 2020remove chrome plating
6June 22, 2020apply 'hasegawa mirror finish'. good chrome effect.
but I recommend for convex surface.
7June 22, 2020gaianotes black surfacer
8June 22, 2020airbrushing
9June 22, 2020done.
10June 22, 2020black filtering.
11June 22, 2020I used 'tamiya panel line accent'
12June 22, 2020decal is good quality. but too dark.
13June 22, 2020removed gate.
I used 'chrome paint for paint brush'
14June 22, 2020sanding
15June 22, 2020panel lining
16June 22, 2020silver coat to inner surface for block subsurface scattering
17June 22, 2020silver
18June 22, 2020masking and remove paint around
19June 22, 2020block subsurface scattering
20June 22, 2020perfect!
21June 22, 2020white surface
22June 22, 2020gaianotes CM-07
23June 22, 2020together. seat is too dark.
24June 22, 2020nooooooooooo
25June 22, 2020mistake
26June 22, 2020two panel lines 🙁
27June 22, 2020coating super glue
28June 22, 2020another trimming surface
29June 22, 2020sanding and airbrushing. I see the step
30June 22, 2020sanding again...
31June 22, 2020other trimming surface
32June 22, 2020another one
33June 22, 2020step again.
34June 22, 2020sanding and paint again.
I fix it!!
35June 22, 2020first clear coat.
Commentaires
7 June 2026, 15:16 -
Album info
trimming and painting
