Mobile 1 NSX (Job Log 1/2)
1December 1, 2021Remove and punch revet.
2December 1, 2021Remove and punch revet.
3December 1, 2021Grind thinly.
4December 1, 2021Fill the pin hole.
5December 1, 2021Masking
6December 1, 2021Mask on XF-16
7December 1, 2021Make temporary handle and attach it
8December 1, 2021Paint black surfacer to inside. To prevent light from passing through...
9December 1, 2021Done
10December 1, 2021Done
11December 1, 2021The wings were painted only on the underside
12December 1, 2021Done
13December 1, 2021Remove for detail up.
14December 1, 2021Make temporary handle.
15December 1, 2021Stick it.
16December 1, 2021Joint line is filled with UV putty.
17December 1, 2021but, filled panel line.
18December 1, 2021Scraping.
19December 1, 2021Mask
20December 1, 2021Paint white surfacer(gloss)
21December 1, 2021
22December 1, 2021Decal trouble occurred.
23December 1, 2021I got shunko decal.
but It was damaged.
24December 1, 2021but, I cleaned it well and used it.
25December 1, 2021Late. but I'm done.
26December 1, 2021It was hard work.
27December 1, 2021Done.
28December 1, 20211st clear coat.
29December 1, 2021Pre-assemble for easy painting.
30December 1, 2021Gunmetal and flat aluminium.
31December 1, 2021Mask again.
32December 1, 2021Done.
33December 1, 2021Detail-up with brass pipe.
34December 1, 2021Dropped and broken.
35December 1, 2021I fixed it temporarily and continued painting.
36December 1, 2021Inner mirror is metal sticker. (It is a sticker that comes inside the tamiya case.
37December 1, 2021It is Hasegawa sheet.
38December 1, 20211. paint
2. Mask with stockings. and airbrushing gun metal.
3. Paint the edges with Tamiya XF-1 marker.
39December 1, 2021Shunko decal is too thick.
40December 1, 2021Rough sanding.
41December 1, 2021Rough sanding.
42December 1, 2021Rough sanding.
43December 1, 2021Modified.
44December 1, 20212nd clear coated. and sanding.
45December 1, 2021It was erased so I drew it.
Comments
6 June 2026, 13:00 -
Album info
in progress...
motorart.tistory.com/361 (Korean)
