EA-6B Project Поглед: Слидесхов Мозаик Листа 1 2 3 4 5 6 7 8 9 10 October 12, 2019
090905 An attempt at an engine compressor face.
11 October 12, 2019
090909 Deployable boarding ladder is a nice feature, but makes for terrible fit.
12 October 12, 2019
190909 Sealing the boarding ladders shut.
13 October 12, 2019
190913 Forward canopy is a two-part affair, with pretty OK fit.
14 October 12, 2019
190913 Added ejection seat face curtain handles from twisted-together colored thread.
15 October 12, 2019
190913 Bottom center insert in place. No filler!
16 October 12, 2019
190924 Masking the canopies with Bare-metal Foil
17 October 12, 2019
190924 Masking the canopies with Bare-metal Foil
18 October 12, 2019
190925 First colors - black for the canopy framing interior
19 October 12, 2019
190925 First colors - black for the canopy framing interior
20 October 12, 2019
190925 Primer coat is cheap gray rattlecan primer.
21 October 12, 2019
19100 Trial of tail stripe decals (home printed). Not thrilled, but I may let it go.
22 October 12, 2019
191001 Wheel wells in PollyScale Reefer White.
23 October 12, 2019
191004 Applying the top color (PollyScale Blue Grey M-485)
24 October 12, 2019
191004 Applying the top color (PollyScale Blue Grey M-485)
25 October 12, 2019
191004 Applying the top color (PollyScale Blue Grey M-485)
26 October 12, 2019
191005 Masking for bottom color (MM Acryl Lt Ghost Grey (
FS36375 )
27 October 12, 2019
191005 Masking for bottom color (MM Acryl Lt Ghost Grey (
FS36375 )
28 October 12, 2019
191005 Folding wings also get the top color.
29 October 12, 2019
191005 Unmasking
30 October 12, 2019
191005 Not thrilled about the demarcation, but it will do.
31 32 October 12, 2019
191007 Radome was penciled in using a circle template, and masked with black electrical tape for its elastic properties.
33 October 12, 2019
191007 Painting the radome. Color is MM Acryl Neutral Grey,
FS36270 (a.k.a. modern USN Haze Grey).
34 October 12, 2019
191008 After a overcoat of Future floor wax, first of the home-printed decals goes on.
35 October 12, 2019
191008 Roundels from a Bare Metal decal US Markings sheet, else home-printed.
36 October 12, 2019
191008 Roundels from a Bare Metal decal US Markings sheet, else home-printed.
37 October 12, 2019
191008 Roundels from a Bare Metal decal US Markings sheet.
38 October 12, 2019
191011 unmasking after final satin varnish.
39 October 12, 2019
191011 Project complete.
40 October 12, 2019
191011 Project complete.
41 October 12, 2019
191011 Project complete.
42 October 12, 2019
191011 Project complete.
43 October 12, 2019
191011 Project complete.
44 45 October 12, 2019
191011 Project complete.
46 October 12, 2019
191011 USN Legacy flight!
Коментари 6 June 2026, 14:42 -
Album info EA-6B Prowler assigned to VAQ-129 Vikings, c. 2011
(Hasegawa EA-6B in 1/72 scale, kit #1137 c. 1979)
Depicts EA-6B BuNo 160609 (EA-6B -70-GR ICAP I, MSN P66), of VAQ-129 in legacy markings to celebrate the Centennial of Naval Aviation (NA100). Aircraft was painted in markings representative of early 1942, about the time of the Battle of the Coral Sea. 160609 was donated to the National Museum of Naval Aviation, Pensacola, Florida and placed on display at NAS Jacksonville in December 2012.
Kit was purchased as a new release 40-plus years ago and rescued from the stash of doom in 2019. Kit was without instructions or decals, but otherwise complete. Colors are PollyScale Non-Specular Blue-Grey (M-485) over MM Acryl Light Ghost Grey (FS36375 ). Radome in MM Acryl USN Haze Grey (FS36270 ). Decals were designed and laser-printed at home (because the Two-Bobs sheet is out of production!).
46 слике
1:72
Завршено
Сви албуми Прикажи све албуме »